Product code: Triton Audio Fethead shops
The shops FetHead Filter from TritonAudio is a low-noise, in-line microphone preamplifier with a built-in 6 dB/octave high-pass filter, which has a corner frequency of 220 Hz. It can be used with microphones that exhibit an excessive proximity effect like long-motor ribbon mics and dynamic microphones. The electronics are housed in a metal chassis with a balanced 3-pin female XLR input and a balanced 3-pin male XLR output. It is suitable for use at home, in the studio, on tour, and more. Attach FetHead to a balanced microphone cable and plug it straight into the microphone. Switch on phantom power and enjoy clean gain. This works with any ribbon or dynamic microphone. Low-noise Class-A JFet amplifier 22 dB of amplification Single-ended amplifier topology Balanced input and output Significant headroom 24 to 48V phantom power.
The shops FetHead Filter from TritonAudio is a low-noise, in-line microphone preamplifier with a built-in 6 dB/octave high-pass filter, which has a corner frequency of 220 Hz. It can be used with microphones that exhibit an excessive proximity effect like long-motor ribbon mics and dynamic microphones. The electronics are housed in a metal chassis with a balanced 3-pin female XLR input and a balanced 3-pin male XLR output. It is suitable for use at home, in the studio, on tour, and more. Attach FetHead to a balanced microphone cable and plug it straight into the microphone. Switch on phantom power and enjoy clean gain. This works with any ribbon or dynamic microphone. Low-noise Class-A JFet amplifier 22 dB of amplification Single-ended amplifier topology Balanced input and output Significant headroom 24 to 48V phantom power.