Product code: Boat Cleat Coat Rack, Nautical Towel Rack, Hat Rack, shops Walnut and Distressed Blue
These nautical boat cleat racks are made of pine planks and galvanized iron cleats. These racks are suitable to be used as coat racks, towel racks, back pack racks, hat racks, or key racks. They are built to be used indoors or outdoors in harsh saltwater environments. All these racks are roughly 4.5" Mounting instructions: These hooks are rated to hold 20 lbs, so a rack with two of these hooks should have a 40lb capacity. For longer or heavier racks, we use heavier d-rings rated for 40 lbs each, which gives those racks an shops 80 lb capacity. The other mounting method takes a little more work but is even stronger and creates an absolutely flush wall mount. For this, simply remove the d-ring hooks we installed on the back of the rack. Then remove one screw from one cleat on each end of the rack and replace our short screw with a long screw (2.5 to 3 inches). Drive that screw all the way through the rack and into a stud or drywall anchor.
These nautical boat cleat racks are made of pine planks and galvanized iron cleats. These racks are suitable to be used as coat racks, towel racks, back pack racks, hat racks, or key racks. They are built to be used indoors or outdoors in harsh saltwater environments. All these racks are roughly 4.5" Mounting instructions: These hooks are rated to hold 20 lbs, so a rack with two of these hooks should have a 40lb capacity. For longer or heavier racks, we use heavier d-rings rated for 40 lbs each, which gives those racks an shops 80 lb capacity. The other mounting method takes a little more work but is even stronger and creates an absolutely flush wall mount. For this, simply remove the d-ring hooks we installed on the back of the rack. Then remove one screw from one cleat on each end of the rack and replace our short screw with a long screw (2.5 to 3 inches). Drive that screw all the way through the rack and into a stud or drywall anchor.